Rothoblaas Structural Noise (Flanking)
PIANO
PIANO is the soundproofing material that reduces vibrations and provides good acoustic comfort, both in lightweight floors and in more complex, high-load buildings.
Certified according to ETA, it is available in 5 versions covering use on a wide range of loads, from floating floors to multi-storey buildings.
Some versions are pre-cut to obtain more widths with the same product. PIANO is identifiable by different geometries and colours that identify the applicable loads.
APPLICATIONS
- Lightweight slabs, timber frame and massive structures such as CLT or LVL
- It can be applied with PRIMER SPRAY or DOUBLE BAND even on battens
With its expanded and extruded EPDM compound, PIANO is a soundproofing material that provides acoustic improvement values of more than 4 dB.
Validate the conformity of this product in your condo
PIANO A
For low loads and light structures.
Performance
Tested acoustic improvement: Δl,ij (3): > 4 dB
Maximum applied load (3 mm deformation): 0,15 N/mm²
Acoustic load: from 0.008 to 0.052 N/mm²
PIANO B
For low loads and light structures.
Performance
Tested acoustic improvement: Δl,ij (3): > 4 dB
Maximum applied load (3 mm deformation): 0,15 N/mm²
Acoustic load: from 0.008 to 0.052 N/mm²
PIANO C
For medium loads.
Performance
Tested acoustic improvement: Δl,ij (3): > 4 dB
Maximum applied load (3 mm deformation): 12,07 N/mm²
Acoustic load: from 0.12 to 1.4 N/mm²
PIANO D
For higher loads than A, B and C versions.
Suitable as soundproofing material for complex buildings with considerable heights.
Performance
Tested acoustic improvement: Δl,ij (3): > 4 dB
Maximum applied load (3 mm deformation): 16.9 N/mm²
Acoustic load: from 1.2 to 2.28 N/mm²
PIANO E
For high loads and multi-storey constructions.
Performance
Tested acoustic improvement: Δl,ij (3): > 4 dB
Maximum applied load (3 mm deformation): 17.07 N/mm²
Acoustic load: from 1.8 to 3.2 N/mm²
